You have no items in your shopping cart.
Close
Search
Filters

HYUNDAI WIA L700LMA CNC LATHE

SKU: M17-0519-4
Call for price (828-201-5076)
- +

SWING OVER BED.................. 41.3"
SWING OVER CARRIAGE............. 32.3"
MAX TURNING LENGTH.............. 128"
SPINDLE BORE.................... 7.1"
BAR CAPACITY.................... 6.5"
SPINDLE SPEEDS.................. 1,500 RPM
SPINDLE MOTOR................... 60/50 HP 3-STEP GEAR
SPINDLE NOSE.................... A1-15
C-AXIS.......................... 0.001 DEG.
X-AXIS TRAVEL................... 19.7"
Z-AXIS TRAVEL................... 129.1"
RAPID TRAVEL (X,Z).............. 472/472 IPM
NO. OF TOOL POSITIONS........... 12 POS. TURRET (ALL LIVE CAPABLE)
INDEXING TIME OF TURRET......... 0.4
LIVE TOOL MOTOR................. 15/10 HP
LIVE TOOL MILLING SPEEDS........ 3,000 RPM
LIVE TOOL TORQUE................ 103/70 LBF.FT
TAILSTOCK TAPER................. MT#6 (BUILT-IN)
QUILL DIAMETER.................. 6.3"
QUILL TRAVEL.................... 5.2"
TAILSTOCK TRAVEL................ 125.2"
APPROX. MACHINE DIMENSIONS...... 307.9" X 121.1" X 106.3"H
APPROX. MACHINE WEIGHT.......... 51,809 LBS

EQUIPPED WITH:

FANUC 32i-A CNC CONTROL
24" SAM CHULLY 3-JAW HYDRAULIC CHUCK, W/BLANK DRAW NUT, 6.49" HOLE
- CHUCK OPERABLE TO 1400 MAX RPM

(1) SAM CHULLY 85MM-350MM PROG. HYDRAULIC STEADY REST INSTALLED
.... 1 ADDITIONAL STEADY REST NOT INSTALLED, BUT INCLUDED
CHIP CONVEYOR

NOTES:
- HOURS ON CONTROL AS OF 12/8/16:
- 177 POWER ON HOURS
- 8:59 RUN TIME HOURS
- 6:25 CUTTING TIME HOURS

ALL ABOVE HOURS TO BE CONFIRMED UPON INSPECTION.


** MACHINE IS IN PLANT, UNDER POWER. AVAILABLE IMMEDIATELY.

MACHINE COST LIST PRICE IN 2013: $450,000

 

SWING OVER BED.................. 41.3"
SWING OVER CARRIAGE............. 32.3"
MAX TURNING LENGTH.............. 128"
SPINDLE BORE.................... 7.1"
BAR CAPACITY.................... 6.5"
SPINDLE SPEEDS.................. 1,500 RPM
SPINDLE MOTOR................... 60/50 HP 3-STEP GEAR
SPINDLE NOSE.................... A1-15
C-AXIS.......................... 0.001 DEG.
X-AXIS TRAVEL................... 19.7"
Z-AXIS TRAVEL................... 129.1"
RAPID TRAVEL (X,Z).............. 472/472 IPM
NO. OF TOOL POSITIONS........... 12 POS. TURRET (ALL LIVE CAPABLE)
INDEXING TIME OF TURRET......... 0.4
LIVE TOOL MOTOR................. 15/10 HP
LIVE TOOL MILLING SPEEDS........ 3,000 RPM
LIVE TOOL TORQUE................ 103/70 LBF.FT
TAILSTOCK TAPER................. MT#6 (BUILT-IN)
QUILL DIAMETER.................. 6.3"
QUILL TRAVEL.................... 5.2"
TAILSTOCK TRAVEL................ 125.2"
APPROX. MACHINE DIMENSIONS...... 307.9" X 121.1" X 106.3"H
APPROX. MACHINE WEIGHT.......... 51,809 LBS

EQUIPPED WITH:

FANUC 32i-A CNC CONTROL
24" SAM CHULLY 3-JAW HYDRAULIC CHUCK, W/BLANK DRAW NUT, 6.49" HOLE
- CHUCK OPERABLE TO 1400 MAX RPM

(1) SAM CHULLY 85MM-350MM PROG. HYDRAULIC STEADY REST INSTALLED
.... 1 ADDITIONAL STEADY REST NOT INSTALLED, BUT INCLUDED
CHIP CONVEYOR

NOTES:
- HOURS ON CONTROL AS OF 12/8/16:
- 177 POWER ON HOURS
- 8:59 RUN TIME HOURS
- 6:25 CUTTING TIME HOURS

ALL ABOVE HOURS TO BE CONFIRMED UPON INSPECTION.


** MACHINE IS IN PLANT, UNDER POWER. AVAILABLE IMMEDIATELY.

MACHINE COST LIST PRICE IN 2013: $450,000