You have no items in your shopping cart.
Close
Search
Filters

OKUMA CAPTAIN L-370SB/MW 4-AXIS CNC, MILLING, SUB SPINDLE, CNC LATHE

SKU: M17-0715-1
Call for price (828-201-5076)
- +

SWING............................. 20.866"
SWING OVER CROSS SLIDE............ 16.54"
MAX MACHINING DIAMETER............ 13.38"
MAX MACHINING LENGTH.............. 20.47"
MAIN SPINDLE SPEED................ 45 - 4,500 RPM
SPINDLE BORE...................... 2.44"
BAR CAPACITY...................... 2.08"
SPINDLE NOSE...................... A2-6
SPINDLE MOTOR..................... 20 HP
SUB SPINDLE SPEED................. 200 - 4,500 RPM
SUB SPINDLE MOTOR................. 10 HP
X-AXIS TRAVEL (UPPER/LOWER)....... 10.23" (7.28 + 2.95)
Z-AXIS TRAVEL (UPPER/LOWER)....... 20.47"
TURRET POSITIONS (UPPER/LOWER).... 12
NUMBER OF LIVE POSITIONS.......... 12

EQUIPPED WITH:

THINC P-100 CNC CONTROL
8" KITAGAWA CHUCK MAIN SPINDLE
6.5" KITAGAWA CHUCK SUB SPINDLE
ROYAL S20 COLLET MAIN SPINDLE
ROHM S10 COLLET SUB SPINDLE
DRAWER OF COLLET PADS & SEVERAL SOLID COLLETS
TOOL PRESETTER
CHIP CONVEYOR (REAR EXIT)
* TOOLING INCLUDED:
** (3) AXIAL LIVE TOOL HOLDERS
** (2) RADIAL DOUBLE END LIVE TOOL HOLDERS
** (2) 1-1/2" BORING BAR HOLDERS
** (1) 1" STICK TOOL HOLDER DOUBLE SIDED
** (1) OF EACH: 1" STICK MAIN, 1" STICK MAIN & 3/4" BORING BAR SUB
** (1) 3/4" BORING BAR MAIN & 1" STICK TOOL SUB
** (1) 1" STICK TOOL FLAT
** (2) 3/4" BORING BAR HOLDER -- 1 FOR MAIN, 1 FOR SUB

*** IEMCA VIP70 BARFEED INCLUDED. NEVER INSTALLED ON UNIT, NO GUARANTEE
****** THIS BARFEED IS INCLUDED FOR FREE, SINCE SELLER NEVER INSTALLED

ITEMS INSTALLED ON SOFTWARE AS STATED IN OSP MANAGEMENT CARD:
ONE TOUCH IGF, ONE TOUCH IGF MESSAGE, HI-G CONTROL
PLANE CONVERSION, PROFILE GENERATION, SYNCHRONIZED TAPPING
NC TORQUE LIMIT, LAP4, NOSE-R 2B, USER TASK 2, 3D ANIMATION
ANIMATION, TOUCH SETTER, TOOL LIFE MANAGEMENT, TOOL WEAR COMP
I/M SWITCH, SPINDLE ORIENTATION, M-AXIS ORIENTATION
LOAD MONITOR, BAR FEED INTERFACE

** WORK DONE ON MACHINE - REPLACED HARD DRIVE & SUB SPINDLE ACTUATOR - WORK
DONE BY OKUMA REP

** IN PLANT, UNDER POWER, AVAILABLE IMMEDIATELY FOR INSPECTION & PURCHASE

SWING............................. 20.866"
SWING OVER CROSS SLIDE............ 16.54"
MAX MACHINING DIAMETER............ 13.38"
MAX MACHINING LENGTH.............. 20.47"
MAIN SPINDLE SPEED................ 45 - 4,500 RPM
SPINDLE BORE...................... 2.44"
BAR CAPACITY...................... 2.08"
SPINDLE NOSE...................... A2-6
SPINDLE MOTOR..................... 20 HP
SUB SPINDLE SPEED................. 200 - 4,500 RPM
SUB SPINDLE MOTOR................. 10 HP
X-AXIS TRAVEL (UPPER/LOWER)....... 10.23" (7.28 + 2.95)
Z-AXIS TRAVEL (UPPER/LOWER)....... 20.47"
TURRET POSITIONS (UPPER/LOWER).... 12
NUMBER OF LIVE POSITIONS.......... 12

EQUIPPED WITH:

THINC P-100 CNC CONTROL
8" KITAGAWA CHUCK MAIN SPINDLE
6.5" KITAGAWA CHUCK SUB SPINDLE
ROYAL S20 COLLET MAIN SPINDLE
ROHM S10 COLLET SUB SPINDLE
DRAWER OF COLLET PADS & SEVERAL SOLID COLLETS
TOOL PRESETTER
CHIP CONVEYOR (REAR EXIT)
* TOOLING INCLUDED:
** (3) AXIAL LIVE TOOL HOLDERS
** (2) RADIAL DOUBLE END LIVE TOOL HOLDERS
** (2) 1-1/2" BORING BAR HOLDERS
** (1) 1" STICK TOOL HOLDER DOUBLE SIDED
** (1) OF EACH: 1" STICK MAIN, 1" STICK MAIN & 3/4" BORING BAR SUB
** (1) 3/4" BORING BAR MAIN & 1" STICK TOOL SUB
** (1) 1" STICK TOOL FLAT
** (2) 3/4" BORING BAR HOLDER -- 1 FOR MAIN, 1 FOR SUB

*** IEMCA VIP70 BARFEED INCLUDED. NEVER INSTALLED ON UNIT, NO GUARANTEE
****** THIS BARFEED IS INCLUDED FOR FREE, SINCE SELLER NEVER INSTALLED

ITEMS INSTALLED ON SOFTWARE AS STATED IN OSP MANAGEMENT CARD:
ONE TOUCH IGF, ONE TOUCH IGF MESSAGE, HI-G CONTROL
PLANE CONVERSION, PROFILE GENERATION, SYNCHRONIZED TAPPING
NC TORQUE LIMIT, LAP4, NOSE-R 2B, USER TASK 2, 3D ANIMATION
ANIMATION, TOUCH SETTER, TOOL LIFE MANAGEMENT, TOOL WEAR COMP
I/M SWITCH, SPINDLE ORIENTATION, M-AXIS ORIENTATION
LOAD MONITOR, BAR FEED INTERFACE

** WORK DONE ON MACHINE - REPLACED HARD DRIVE & SUB SPINDLE ACTUATOR - WORK
DONE BY OKUMA REP

** IN PLANT, UNDER POWER, AVAILABLE IMMEDIATELY FOR INSPECTION & PURCHASE

Product tags